Real Sliding Door Repairs. Real Results.

Services Performed

• Removed the failed, heavily rusted roller assemblies
• Installed new precision rollers
• Cleaned and prepared the deteriorated track areas
• Installed new track surfaces over the damaged existing tracks
• Reinstalled and properly aligned the sliding doors
• Adjusted the doors for smooth operation and proper locking
• Completed final testing

Project Overview

Years of severe corrosion had left these Santa Monica sliding doors extremely difficult to move. The roller assemblies were heavily rusted and deteriorated, and the existing track surfaces were badly damaged. The homeowner reported that the doors had essentially been unusable for almost eight years. Quality Sliding Door Repair removed the failed rollers, installed new precision rollers, restored the damaged running surfaces with new track material, reinstalled and aligned the doors, and adjusted the system for proper operation.

Services Performed

• Completed a full sliding door rebuild
• Removed the existing worn roller assemblies
• Installed new precision rollers
• Cut down the door as needed to restore proper operating clearance
• Reinstalled and properly aligned the sliding door
• Completed final testing for smooth operation

Project Overview

This Northridge sliding door had become extremely difficult to operate and was grinding along the top channel. A standard roller replacement alone would not have addressed the clearance problem, so the job required both a complete sliding door rebuild and a cut-down of the door to restore proper operating clearance. After the rebuild, new precision rollers, reinstallation, and alignment, the door was tested for smooth operation.

Services Performed

• Cut down the top of the door to restore clearance beneath the bowed upper channel.
• Replaced the old single-wheel rollers with new double-wheel precision rollers.
• Replaced the broken handle.
• Installed a new white bumper.

Project Overview

This Tarzana sliding glass door was trapped against the bowed upper frame, and its failed rollers and broken handle made it difficult to use. We cut down the top of the door for clearance, installed new double-wheel precision rollers, replaced the handle, and added a new bumper to restore the existing door.

Services Performed

• Complete rebuild of the affected multi-slide operating panel
• Serviced and adjusted the operating system
• Corrected the panel alignment as needed
• Reassembled and adjusted the multi-slide panel
• Completed final testing for smooth, proper operation

Project Overview

An oversized multi-slide door in Hollywood Hills had become jammed and inoperable. The operating panel was extremely difficult to move and could no longer be used normally. Quality Sliding Door Repair completed a full rebuild of the affected multi-slide panel, corrected the operating and alignment issues, and adjusted the system to restore proper movement and operation.

Services Performed

• Removed the oversized main operating panel
• Removed the failed existing rollers
• Installed new precision quad rollers
• Cleaned and serviced the track area
• Supplied and installed a new locking keeper
• Reinstalled and properly aligned the large door panel
• Adjusted the door and locking system
• Tested the complete system for smooth rolling, locking, and automatic operation

Project Overview

One of the main panels in this oversized multi-slide door system had become jammed and extremely difficult to move. The door was also tied into an automatic belt-driven operating system with a safety shutoff. Because the panel was creating too much resistance, the automatic system would shut down and the door could no longer open or close properly. We removed the large operating panel and completed a full rebuild of that panel using new precision quad rollers. We also serviced the track area, installed a new locking keeper, reset the panel, corrected the alignment, and adjusted the system before final testing.

Services Performed

• Full sliding door rebuild
• New precision rollers
• Track cleaning and service
• Door alignment and adjustment
• Hardware inspection

Project Overview

Our team performed a complete sliding door rebuild at a Culver City residence. The door was removed, inspected, and rebuilt with new precision rollers. The track was thoroughly cleaned and serviced, and the door was properly aligned and adjusted before reinstallation.

Services Performed

• Sliding door repair
• Roller inspection
• Track cleaning
• Door adjustment
• General maintenance

Project Overview

Our technicians repaired a sliding door that had become difficult to open and close due to worn components and track buildup. After cleaning, servicing, and making the necessary adjustments, the door was restored to smooth, dependable operation.